How to Clean a ForteCast® Floor (Without Damaging It)
One of the best things about a sealed ForteCast® floor is how little cleaning it needs. There are no grout lines to scrub and no carpet to stain—just a smooth, sealed surface that wipes clean. Here's the simple routine to keep it looking showroom-fresh, plus what to avoid.
Everyday cleaning
- Sweep or vacuum loose dust and grit regularly.
- Mop with warm water and a pH-neutral cleaner.
- Wipe spills promptly—a sealed surface gives you time.
- Use a soft microfibre or flat mop, not abrasive pads.
Deep cleaning
- Vacuum thoroughly to lift all loose grit.
- Mix warm water with a pH-neutral floor cleaner.
- Mop in sections, rinsing the mop often.
- Rinse with clean water to remove any residue.
- Let the floor air-dry or buff with a dry microfibre cloth.
Removing stains
Because the surface is sealed, most spills sit on top and wipe away. For stubborn marks, a little warm soapy water and a soft brush usually lifts them. Tackle oily or coloured spills (wine, coffee, grease) sooner rather than later for the easiest clean-up.
Keeping the seal fresh
In high-traffic areas, re-applying a UV sealer every few years restores colour depth and stain resistance. It is a quick job that keeps the floor performing like new for decades.
Cleaning outdoor marble surfaces
Patios and outdoor steps can take a gentle pressure wash to shift seasonal dirt and algae. Keep the lance moving and avoid blasting at close range, which can disturb the surface.
Frequently asked questions
- Can you mop a ForteCast® floor?
- Yes. A sealed ForteCast® floor is designed to be mopped with warm water and a pH-neutral cleaner. Avoid harsh chemicals and abrasive pads to protect the sealer.
- What is the best cleaner for ForteCast®?
- A pH-neutral floor cleaner diluted in warm water. Avoid bleach, acids and solvents, which can dull the finish over time.
- How often should I reseal a ForteCast® floor?
- For most interiors, every few years in high-traffic zones is plenty. Resealing restores colour depth and keeps the surface stain-resistant.
Finishes mentioned in this article
Ready to start your floor?
Price your exact area in seconds and get a complete kit delivered to your door.
Keep reading
How Long Does ForteCast® Take to Cure?
Most interior ForteCast® floors take light foot traffic in 12-24 hours and fully cure within 48-72 hours. Here is what affects the timeline and how to get it right.
DesignBest ForteCast® Colours for Small Rooms
The right finish can make a small room feel noticeably bigger and brighter. Here is how to choose ForteCast® colours that open up compact spaces.